Jump to content



Toggle %s Hello Guest

Hello!

If this is your first visit, we invite you to register (click here) for full user access. Membership is free but is required in order to post to our forums. Membership entitles you to a discount on Native Watercraft Accessories purchased through the forum host, Get:Outdoors. Please read over guidelines and rules on the use of the forum here (Click Here)


Thank you.
Welcome Guest Messages 6.0.0 © 2018 VirteQ

Photo
- - - - -

DIY Cart Fix


  • Please log in to reply
1 reply to this topic

#1 kayl

kayl

    Member

  • Members
  • PipPip
  • 12 posts

Posted 06 May 2017 - 09:03 PM

I took the time this week to make my Ultimate FX 15 Tandem sit more securely on my cart and thought I'd share the info with the group.

My cart is a generic cart, similar to this one:
https://www.amazon.com/dp/B00852QTIC/
Or this one:
http://www.ebay.com/itm/112396663693

I took a "Mega Monster Funnoodle" and cut it into 2-18" pieces and slid scrap 1" pvc in the center for a little extra firmness.

I then zip-tied the noodles to the cart at the point where they were at the proper width for my kayak's center channel.

s2iD5Q8.jpg

After verifying that I was happy with the noodle placement and how tight the zip strips were I snipped off the tag ends. The result was a very stable cart. I lost the ability to fold it, but I never need to other than 1 trip a year that requires it during transit to my destination.
  • NOG Admin likes this

#2 Sammyfallen

Sammyfallen

    Member

  • Members
  • PipPip
  • 12 posts

Posted 23 September 2017 - 04:51 PM

I made this cart today with stuff from around the house. Seems to work very well.

Attached File  KIMG0279.JPG   370.29KB   2 downloads




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users